HMI DC Changelog
================

1.0.0.35690
 *** Match with firmware 1.0.DC.35512 or later
- Added WaveLog channels for raw samples (1024 SPC)
- Added variable Average MW in Data Handling charts
- Fixed Spanish translation message for PLC not Active
- Fixed FurnaceOverview bar variables (X)
- Improved Spanish translation

1.0.0.34993
*** Match with firmware 1.0.DC.34895 or later
- Added Clamp inputs and HeatSheet Clamp indicators: ClampOpenCount, ClampOpenTime, PowerOffInnerLongestClamp and PowerOffInnerLongestClampAny
- Renamed variables in Vars Config, Trend Variable Selector and Resources to make explicit Error, SP and Feedback for Resistance.
- Updated Keypad and NumericInput to use point and comas for any data input.  
- Improved multi-language handling in Event Log Viewer
- Improved Spanish translation
- Improved Japanese translation
- Fixed License link in the User Manuals (EN,ES,JP) to work with HelpWindow
- Fixed dialog icons
- Fixed issue in ManualOperation screen Save button

1.0.0.34729
*** Match with firmware 1.0.DC.34489 or later
- Added Balance Setpoint from PLC in Manual Operation Screen
- Added Balance Setpoints to I/O map for display, logs and trends
- Added Special Variables BalanceSPClampMin and BalanceSPClampMax to set custom balance limits
- Fixed control resize in Event Log Viewer and I/O Filter charts
- Fixed problem in IOConfiguration invert channel signals
- Updated English HMI DC User manual
- Updated HMI Spanish and Japanese screen translations
- Fixed several issues in translated screens (as reported from AC FAT)
- Fixed some issues in Event Log Viewer when selecting Time in the graph
- Fixed issues in Event Log Viewer when selecting Scatter and XYColor graphs

1.0.0.34462
- Updated Japanese HMI Manual
- Changed External Data load dialog filters to import rph and csv
- Fixed External Data import own CSV problem

1.0.0.34396
- Updated English, Japanese and Spanish user manuals, all images in PNG format
- Added value validation warning in Position units
- Increased Furnace Type EAF diagram size
- Fixed Online help hyperlinks
- Fixed decimal and hex keypads

1.0.0.34250
- Fixed display issues in Shaper and VMEIO screens
- Fixed link to Spanish user manual
- Fixed user manual links in table of contents

1.0.0.34193
*** Match with firmware 1.0.DC.34131
- Added Japanese translation
- Added NCC Disable action in Manual mode
- Added SpoolPosition measurement using AI channels (IP330)
- Added MWhPrimaryMeter variable to show the HeatMWH read by the Nexus meter
- Updated Spanish translation, including manual and diagnostic messages
- Fixed VMEIO screen channel bugs
- Fixed SpecialVariables grid colors
- Fixed problem in HMI system update
- Fixed documentation problem in outputs map after modbus address 401140
- Fixed External Data grid column alignment
- Fixed keyboard's shift key toggling

1.0.0.33024
- Added RegulatorOutOffset configuration model
- Fixed Special Variables grid foreground color
- Fixed problem with Invert polarity checkboxes

1.0.0.32947
- Added many features that had been done previously in AC
- Added secondary side MWh calculation
- Added heat report units for RWI and I2h
- Added Overview bar variables for Electrode Pressure, Position, Speed and Valve Spool%
- Added electrode number to alarm messagese
- Added RWIeu and fixed RWI calculation and units (reported RWI and ArcLength values may be slightly higher now)
- Added RWIeu, ArcVoltage and Y to overview bar variables
- Added extract_local.bat to be able to extract Winsrv.zip and rename automatically all .deploy files
- Changed charts, keep the selected events when navigating
- Changed current range (0-655.35 kA)
- Changed Integral defaults to slower values
- Updated company name references in HMI and UsersManager
- Updated default Vars Config min/max/span
- Updated labels on ElectricalSystem screen on tabs Furnace, Reactor, Substation and Short Circuit (e.g. "%Z MVAref" is now "MVA for %Z")
- Fixed keyboard limits for I/O Configuration "Current Rate (A/V)" and Power Programs "I Setpoint"
- Fixed IndexOutOfRange exception spam when StoredRegulatorId file is empty
- Fixed Power Program exception showing "Path not found, seeking ChargeX"
- Fixed alarm messages that had no spaces
- Fixed Timeline Statistics heat inclusion logic that could calculate incorrect statistics
- Fixed Timeline heat count, it wasn't reset when selecting a day without heats
- Fixed Electrode Gain Test errors when switching shaper profiles
- Fixed HMI offline error that could show an old configuration file
- Fixed timeline duration conversion in locales with comma as decimal separator
- Fixed heat report counters that overflowed at 32767
- Fixed Heat report values when running in locales with comma as decimal separator and point as thousands separator
- Fixed Electrode speed test chart display bug.
- Fixed I/O Configuration Invert checkbox state

1.0.0.30462
- Fixed potential problem with HMI time display
- Fixed potential error in Event screen that could make it unresponsive the first time it was opened
- Changed Gain test StepDuration units to use ms
- Updated DC documentation to include FCR version 2 variables

1.0.0.30309
- Fixed problem handling some timezones

1.0.0.30059
- Added FCR Overview and FCR Status screens when FCR communication is version 2

1.0.0.29995
- Added support to FCR communication map version 2 (fuses, temperatures, status, etc.)
- Added performance heat report fields ControlSmartARCPercent, ControlPowerProgramPercent, ControlManualPercent summary variables
- Fixed Power Program field VLimit that was not displayed and could not be changed
- Fixed font scaling problem when resizing the HMI
- Fixed bad scaling of heat trends chart in Performance Heat Report for cultures that use comma as decimal point
- Added validation to VmeIOConfiguration model for duplicate channel names, numbers or missing channels

1.0.0.29484
- Fixed Menu button Power Curves that was inserted by mistake

1.0.0.29473
- Added support for hiding the HMI when operating in Shadow mode and showing it when being active (General Settings), useful when there are multiple controllers

1.0.0.29297
- Updated documentation: RegStatus ControlPowerProgramPercent and ControlSmartARCPercent; Operation.ChargePowerOnTime_Offset units and divisor; SmartARCSupport.* divisors

1.0.0.29031
- Fixed IOConfiguration voltage divider R2 control that was being hidden incorrectly on single electrode furnaces

1.0.0.28280
- Added Electrical System - FCR Modbus Address Offset

1.0.0.26223
- Fixed online help and updated Auto Lower text and images
- Fixed bug that caused exported files miss columns containing tag or id, like Voltage
- Added missing AdvancedControlProfile column to Heat Report

1.0.0.25993
- Added balance column to statistics dialog
- Fixed a potential model corruption in the model Undo button
- Fixed External Data loading issues

1.0.0.25680
- Improved the Electrode Tests information gathering to prevent incomplete test packagess. 

1.0.0.25481
- Fixed display Dynamic NCC Setpoint scale. The scale adjustment depends on Min and Max pressures at the Analog Inputs.
- Improvement at Proxy Service, after save Network Settings the service is reconfigured automatically in order to let other services (Trends & HMI) communicate with QNX.

1.0.0.25299
- Added CurrentSetpoint and ActionDelay to AutoLower Model Isp and OnDelay added. 
- Screen layout improved. Units labels corrected.
- ReSized the Color Boxes for selecting the color of the trend
- Improved upgarde time to be applied

1.0.0.23812
- Fixes to LEDs (Auto, JS Raise, JS Lower) on twin shells without independent electrodes
- Added Invert setting to Encoder channel
- Fixed bug in Furnace Type that prevented it from being saved

1.0.0.23611
- Shaper Screen - Speed, Ramp and enable checkbox for FastRaise 
- Spanish translation - Shaper Screen - Speed, Ramp and enable checkbox for FastRaise